AR-15 CompMag. New York Version.

(1 Review)
$62.99
Current Stock:

 The AR-15 CompMag. New York Version.

The New York Version of the AR-15 CompMag. It loads the same as the California version except it does not include or accept any of the locking features the California version uses for compliance. New York compliance is different and requires a different solution, so we removed the CA. compliance parts and lowered the price. It can also be used in other states that do not require a fixed magazine.

It does not, by itself, make your firearm New York Compliant. You must add your own compliance device. For information on New York Compliance please read "Is the CompMag N.Y. Safe act compliant" at AR-15 CompMag Information

Features:

10 round capacity.

No need to "break your action" or deviate from the normal operation of your firearm to reload.   

No pins to pull out. No fumbling with extra parts or loaders.

Loads easier than a standard magazine. No heavy spring to push each round against.

Will fully load on a closed or open bolt.

Constructed of impact and crush resistant, G.F. Nylon 6.

Ultra durable and heavy duty, built to last. 150% to 300% thicker side walls than most polymer magazines.

17-7 Stainless steel magazine spring.

CNC turned steel charging handle with glossy black oxide finish.

Compatible with standard AR-15 type lowers. (M4, M16, AR15).

NOT compatible with lowers that have a custom or extended magazine well. (such as Seekins SP225, Sharps Bros, HKMR, and Spike's Jack.)

Compatible with many firearms that accept a STANAG (standard AR-15) magazine and that have a removable upper receiver, including: SIG MCX, Daewoo DR200, Bushmaster ACR, CZ Bren, and SIG556. (Will not work in the Tavor or SCAR16).

Round counter indicates exactly how many rounds are left in your firearm, including what's in your chamber.

Holds the bolt open after the last round is fired. Bolt catches and their machined positions in the lower vary. This feature is compatible with most combinations. Even if this feature is not compatible with your set up, the AR-15 CompMag is designed so that the bolt carrier group will not contact the follower when the magazine is empty.

Allows for easy clearing of type 3 malfunctions (such as double feeds).

Accepts both .223, 5.56, and .300 BLK ammunition.

Designed and Made In the U.S.A.   Right here in California.

 

 READ ALL INSTRUCTIONS:

Before using, please read the instructions and watch the videos found in the recent posts section on our home page, entitled "Loading and Unloading the AR-15 CompMag. Clearing Double Feeds.". This will help you better understand how the CompMag operates.   

 IMPORTANT NOTE: If you are using a device that disables the magazine release with a screw, do NOT tighten it down enough to squeeze the CompMag. Squeezing the CompMag with the magazine catch will result in rounds not being able to pass through the magazine. Always check functionality of the firearm and the ability for rounds and the follower to move through the magazine BEFORE using the epoxy to seal the screw. The CompMag is not compatible with the Mean Arms MA Lock, as it squeezes the CompMag.

Thank you.

 

 

 CompMag LLC. is not held responsible for injury or damage from inaccurate assembly, misuse, illegal use or modification of this device, nor are we held responsible for your understanding or interpretation of the laws and regulations that may apply.

Reviews (1)

Awesome design and build!

Written by Peter daniell on Feb 6th 2019

When I started looking for solutions to the New York and California nonsense there were many products but all seemed similar in design and purpose. Your approach is awesome with its design and execution. The magazine has worked flawlessly and has had no issues. It’s so easy to reload that it makes it almost bareable to deal with my states nonsense (almost). But your design and build is much appreciated and has made me a new loyal customer of yours. I will be sending more customers your way!

Related products

Customers also Viewed